Before-class announcements:
Homework 1 due 11:59 MST on Thursday, Aug 30th, 2018.
In-class activities.
Today, we learn the basics of JavaScript, and start by making simple programs that animate simple things with it. By the end of the next lecture (and a good amount of experimenting of your own), you will have most of the tools you need to write visualizations in JavaScript. Later in the course, we’ll use d3 because of its power and expressivity. But all that d3 does is use these APIs for you, and it is important that you understand at some level how d3 works.
There are many good resources for learning JavaScript on the web.
As I did last week, I highly recommend Scott Murray’s Interactive Data Visualization for the Web. And, again as I did last week, I’ll say you should just buy it if you can.
Douglas Crockford’s JavaScript, the Good Parts is at the time of writing also only 20 dollars, and it’s a handy reference. David Herman’s Effective JavaScript is a bit more expensive, but also deeper.
In addition, you can also read the
Mozilla Developer Network’s JavaScript Guide. It
will cover much of what this covers. For a slower, more interactive
take on the same material, there’s
codecademy’s JavaScript track.
Every time I search for javascript documentation on google, I just
throw in the term mdn, for Mozilla Developer Network. This makes
sure that MDN is in the first few hits, and the quality of the results
is much improved.
If you’re following the text below, my suggestion is that you either open the Developer Tools’s JavaScript console on a browser window, and type the examples to see what they do, like we go over in class. You should also try variants, and just generally play around with the console, to get a feel for the language.
Before we get started, though, a few words of warning: there is a lot of bad JavaScript advice on the internet. For example, although StackOverflow is typically a high-quality Q&A website, I would stay well away from it when it comes to JavaScript (why that is the case is beyond my understanding). Finally, the introduction below is not meant to give you a comprehensive description of JavaScript, but rather a foothold.
Once you become proficient in the language, then you can start worrying about best practices and special cases, especially as they related to performance and portability across browsers. It’s easier for you simply not to worry about that kind of stuff right now. This does mean that if you’re a veteran JavaScript programmer, you’ll spot places where what I’m writing is not 100% accurate. If you were to complain, you’d be technically correct, but what are you doing reading a JavaScript beginner’s guide? We’re in Tucson; it’s sunny outside!
If you know any other mainstream programming language, JavaScript will feel sufficiently familiar. It has variables which hold values:
a = 0;
b = "1";
c = [1, 2, "3", [4]];
f = false;
f = 34.56;
The first thing to notice is that JavaScript’s variables are dynamically typed: you don’t need to declare their types before using them, and they can refer to values of different types at different times in the program execution. (This is convenient but quite error-prone: it’s usually a bad idea to make too much use of this feature.)
You also do not need to declare a variable ahead of time. If you don’t, then JavaScript either assumes you’re referring to an already existing variable, or it creates a new global variable. Again, this is convenient but very error-prone (this is a theme, as you’ll see). One common source of confusion is that typos in variable assignments are not caught: they just become global variables.
To create a local variable, use the keyword var:
var x = 0;
To print a value on the console, use console.log:
console.log(a);
console.log(22 / 7);
console.log(Math.PI);
Compound values in JavaScript will be of either of two types: arrays or objects. Array literals are declared using square brackets:
var c = [0,1,2];
var e = []; // empty array declaration
Arrays are addressed using square brackets, like many other languages:
console.log(c[0]);
(Notice that array values can have different types as well.) The other main type of compound value in JavaScript is the object. Objects are declared with curly brackets:
obj = {
key1: 3,
key2: 4
};
Array values be accessed with curly brackets, and so can object values:
console.log(obj["key1"]);
Notice how we’re using strings here as keys. Alternatively, you can use a familiar notation from other object-oriented languages:
console.log(obj.key1);
You can also add new fields to objects.
obj.key3 = "new value";
But, as usual, this can be error-prone:
obj.Key3 = "something"; // this is likely not what you meant!
These are the basics to get you started reading JavaScript code. We’ll say more about these values as needed.
Programs that are just sequences of variable assignments are not very
exciting, and one way we usually build more complex programs is via
procedural abstraction. We define a sequence of steps we’d like to
give a special name, and create a procedure that performs those steps
for us. In JavaScript we use the keyword function for this:
function someFunction(v) {
if (v < 10) {
return v;
} else {
return v*v;
}
}
This produces the expected results:
console.log(someFunction(30));
console.log(someFunction(-5));
But, as usual, JavaScript lets you do strange things that are convenient sometimes, and confusing at other times:
console.log(someFunction("50"));
console.log(someFunction("what?"));
console.log(someFunction(30, "huh?"));
console.log(someFunction(30, "huh?"));
console.log(someFunction());
None of the calls above cause runtime errors. If you call a function
with too many parameters, JavaScript will simply ignore the extra
ones. If you call a function with too few parameters, JavaScript
gives the local parameters the special value undefined. Local
scopes (where local variables can be defined) can only be created
inside functions:
function anotherFunction(v2) {
var x = v2 * 10;
return x * v2;
}
console.log(x);
// If your global scope has no x variable, this will raise
// an error.
The typical way to declare a function to be called by a name is what we just saw. But there’s another important way to achieve the same effect:
someOtherFunction = function(v) {
if (v > 10) {
return "big";
} else {
return "small";
}
};
Pay attention to what’s happening here: this is assigning a value to a
variable, in the same way that x = "hi" assigns the string value
"hi" to the variable x. But that value is a function! This is
important. In JavaScript, functions are values that can be stored in
variables. When a variable is holding a function, you call that
function by using the parenthesis notation, as you’d expect:
someOtherFunction(30);
But later you can reassign that function, and then you’d be calling something else:
someOtherFunction = function(x) { return x - 5; };
someOtherFunction(30); // returns 25 instead of "big";
This is your first exposure to the idea that JavaScript is a “functional” language. In the same way that you can store function values in variables, you can pass them around as parameters, store them in arrays, object fields, and even use them as return values of other functions! This is a powerful idea that we will use a lot.
JavaScript has for loops, like C:
for (i=0; i<10; ++i) {
console.log(i);
}
While loops:
i = 3;
while (i<100) {
console.log(i);
i = i * 2;
}
Do loops:
i = 3;
do {
console.log(i);
i = i * 2;
} while (i<100);
and switch statements:
i = "some case";
switch (i) {
case "string literals ok":
console.log("Yes");
break;
case "some case":
console.log("Unlike C");
break;
}
Notice that the switch statement accepts string literals, unlike what you might be used to from C.
If we create an object with slots that hold functions, this starts to look like methods from Java and Python. If we create a function that returns these objects, this starts to look like class contructors:
// Let's build something that looks like OOP
function createObject(content) {
var result = {
get: function() {
return content;
},
set: function(newValue) {
content = newValue;
},
twice: function() {
return content * 2;
}
};
return result;
}
f = createObject("something");
f.get();
f.twice();
f.set(20);
f.get();
f.twice();
It’s interesting to note how, with no class declarations, JavaScript provides something that has a strong “object-oriented” feel (in constrast to C++, Java, and Python). In fact, using just this pattern above, you can write a lot of object-oriented software. The only thing you’re missing is inheritance.
JavaScript does support a notion of inheritance, but it does it without any classes. This means that there’s no subclasses, so how does it work?
Instead of subclasses, JavaScript has the notion of a prototype
chain. Every JavaScript object has a special field which points to
another object. Then, every time you tell JavaScript to access a
field from an object, it tries to find the field. If the field exists,
then the lookup is performed. If, however, the field doesn’t exist,
then JavaScript checks for the presence of a special prototype field
in the object. If that field is not null, then the JavaScript
runtime performs a recursive access of the field in the prototype
object. This is more obvious with an example. Make sure to run these in
your JavaScript console:
// Inheritance, with no classes
base = {
v1: 1,
v2: 2
};
derived = {
v1: 5,
v3: 3,
v4: 4
};
console.log(base.v1);
console.log(derived.v1);
console.log(derived.v2);
// this calls sets the prototype of derived to be the base
Object.setPrototypeOf(derived, base);
console.log(derived.v1);
console.log(derived.v2);
This way, when you want to create a subclassing relationship, you do
it by defining a base object, and making sure that derived objects
have the base object as their prototypes. In practice, you would never
call setPrototypeOf directly. Instead, you’d call Object.create,
which creates a fresh new object without any fields (like {}), but
with a set prototype:
// Instead of using setPrototypeOf, use:
v = Object.create(null); // this is just the same as {}
v2 = Object.create(base);
v3 = Object.create(v2); // etc.
thisJavaScript has a special variable that is available at every scope
called this. When a function is called with a notation that
resembles methods in typical object-oriented languages, say
obj.method(), then this is bound to the object holding the method
(in this case obj). this allows you to make changes to the local
object:
function otherObject(value)
{
return {
x: value,
get: function() {
return this.x;
},
set: function(newValue) {
this.x = newValue;
}
};
}
Now try running these examples:
other = otherObject(3);
other.x;
other.get();
other.set(5);
other.get();
other.x; // compare example to "createObject"
So far, so good: we’ve used this to change the value bound to the
x field in the object from the object itself. That’s pretty
convenient.
However, the convenience comes with a caveat. The way JavaScript
decides to associate this with a given object is simple to explain,
but sometimes leads to strange behavior. The way it works is that
although obj.someFunction is the syntax to access the someFunction
slot from obj and someFunction(parameter) is the syntax to call a
the function value bound to someFunction with parameter parameter,
the syntax obj.someFunction(parameter) is not equivalent to
storing obj.someFunction to some temporary variable and calling
that. In other words, the syntax obj.someFunction(parameter)
consisting of those three things next to one another is special to
JavaScript.
Here’s what can go wrong:
function yetAnotherObject()
{
return {
x: 3,
get: function() { return this.x; };
};
}
obj = yetAnotherObject()
console.log(obj.get()); // fine
var t = obj.get;
console.log(t()); // *NOT* fine
What happened in the example that goes wrong is that when t() is
called, JavaScript doesn’t see the special notation
obj.method(params), and so it keeps the binding of this to its
present value.
Anytime you use this and something goes wrong, the first you should
try to check is whether some call in your chain forgot to set the
binding by using the right syntax.